How a pin tumbler lock works
Most house keys turn a pin tumbler lock. This guide shows what is going on inside, using the animated diagram at the top of this site.

- Subject
- How a pin tumbler lock works
- Series
- Guides
The parts
- Spring: pushes each pin stack down into the plug.
- Driver pin: sits above the shear line. Each is a different length.
- Key pin: its length matches one cut on the key.
- Shear line: the gap between the plug (the part that turns) and the shell.
- The key: five cuts lift five pin stacks to exactly the right height.
What the key does
Without a key, the driver pins reach down across the shear line and stop the plug from turning. When the correct key goes in, every cut lifts its stack until the gap between the key pin and the driver pin sits exactly on the shear line. Now nothing crosses the line, and the plug turns.
Why it matters when you buy a lock
More pins and tighter tolerances make a lock harder to defeat. Cheap locks have loose tolerances. Anti-snap and restricted cylinders add features on top of this basic design. See euro cylinders and anti-snap.
Re-keying uses the same idea
Re-keying changes the pins, so a different key lifts them. That is why it can make a lost key useless without replacing the lock. See re-keying.
Why worn keys cause stiff locks
Every turn wears the cuts on a key a little. A worn key stops lifting each pin to exactly the right height, so the lock feels stiff or only works if you jiggle it. A key copied from a worn key is worn from the start. When you need spares, cut them from the original, or ask Tony to cut a fresh set when he changes the lock.
A lock is only as good as the door
The most expensive cylinder in the world will not help if the door is thin, the frame is soft or the hinges are weak. When Tony checks a door he looks at how it hangs and closes as well as at the cylinder, because a dropped door can stop a good lock working. See security surveys.
Quick answers
Why do keys wear out?
The cuts are worn by thousands of turns. A worn key can stop lifting the pins accurately, which makes a lock feel stiff.
Is more pins always better?
Generally yes, but build quality matters as much as pin count.
Can a lock be picked?
Any pin tumbler lock can be picked by someone skilled. Good locks make it hard, and a good lock on a good door is what deters most people.
Related
Services and guides connected to this one.