TLS LocksmithsCamborne, Cornwall

Is your multipoint lock failing? The signs

Multipoint locks fail slowly, then suddenly. Here is how to spot the warning signs.

A hand holding a tape measure against a door lock gearbox
Checking the measurements
Subject
Is your multipoint lock failing?
Series
Guides

The signs

  • The handle feels loose or does not spring back
  • The key is stiff
  • You have to lift the handle hard, or slam the door, to lock it
  • The door locks some days and not others
  • The bolts do not extend fully

Why it happens

A gearbox has springs and moving parts that wear. The door can also drop so the bolts do not line up.

What to do

Call before it fails. A failed gearbox can lock you in or out. Tony measures the old gearbox and orders a match.

Why you should not wait

A failing gearbox can leave you shut in or out, usually at the worst moment. A sticking multipoint lock also stops the door locking at all its points, which makes it much weaker against a break-in. Replacing a gearbox early is a planned job; waiting until it locks you out is an emergency.

Check the handle and keeps first

Before blaming the gearbox, check that the handle is firmly fixed, the keeps on the frame are not worn or out of line and the hinges are tight. Sometimes a small adjustment cures the problem. Tony checks these first so you do not pay for a gearbox the door did not need.

Quick answers

Can I fix it myself?

A DIY fix risks making it worse. Get it measured properly.

How long do they last?

It depends on use and quality.

Is it costly?

Ask for a free estimate. It is usually far less than a new door.

Call TonyWhatsAppText